J
-
John McGaw
Contact options for registered users
Vote on answer
- posted
5 years ago
Fri, Nov 23, 2018 8:36 PM
Just try googling for "movements for vienna clock" and you'll find a load of possibilities. Just be careful about where the supplier is located and what the currency and customs complications might be. One of the real beauties I found was a high-end German Hermle with a price tag of $1175 but that was Australian dollars. If you find that price shocking you might start with the eBay listings. The last time I bought something similar I remember the price as being around $325 but that was 30 years back.
Loading thread data ...
S
-
Silence
Contact options for registered users
Vote on answer
- posted
5 years ago
Sun, Feb 17, 2019 2:16 PM
replying to Dr. Deb, Silence wrote: I too am interested in a copy of these plans. I had given up on ever finding them. Thank you for your consideration.
G
-
Gee
Contact options for registered users
Vote on answer
- posted
4 years ago
Wed, Nov 13, 2019 3:54 PM
replying to Silence, Gee wrote: Are you still looking for the plans? I do have a set of plans and some of the instructions for it. The plans are too large for my scanner but I can probably use my camera and photoshop them into a PDF format.
B
-
brian
Contact options for registered users
Vote on answer
- posted
3 years ago
Thu, Aug 27, 2020 2:33 PM
Hi John, I know this post has been kicking around for a while but I too am in need of the 7672 Vienna Regulator instructions. Would you mind sending them to me as well?
G
-
Gary
Contact options for registered users
Vote on answer
- posted
2 years ago
John, I have been unsuccessfully searching for Mason and Sullivan Vienna Regulator plans. If you still have copies I would like to purchase a set from you, of course covering the cost of mailing, etc. If you have any, please reply to this message and I will send you my contact information as well as a check. Thanks, Gary Keiter
C
-
Cole
Contact options for registered users
Vote on answer
- posted
1 year ago
Sun, Aug 21, 2022 8:24 PM
Hi John, should you still have a set of the Mason & Sullivan #7672 plans and assembly instructions, I would be happy to purchase copies of them. Having finally retired, I now have the time and incentive to build one of these beautiful clocks. Many thanks for your consideration!
C
-
Cole Metz
Contact options for registered users
Vote on answer
- posted
1 year ago
Mon, Aug 22, 2022 6:24 PM
Hello Leslie, I know this is an old post, but if you still have a copy of the #7672W plans/instructions I would be happy to pay you for them. Thank you for your consideration!
C
-
Cole Metz
Contact options for registered users
Vote on answer
- posted
1 year ago
Mon, Aug 22, 2022 6:27 PM
Hi Gee, If you still have a copy of the #7276 M&S clock plans I would be happy to pay you for them. Thank you for your consideration!
F
-
Frederick H. Carr
Contact options for registered users
Vote on answer
- posted
1 year ago
Tue, Nov 29, 2022 3:07 PM
If you still want them, I purchased the trim kit with plans, and never built the clock. Let me look for them if you are still interested. My email address is in the system, so I think you can respond to this and reach me.
Rick Carr
C
-
Cole
Contact options for registered users
Vote on answer
- posted
1 year ago
See AlsoRegulator Clock – DoneTue, Nov 29, 2022 4:24 PM
Hello Rick, yes I am still looking for the plans. I would be interested in the trim kit too if you still have it. Please email me at snipped-for-privacy@yahoo.com with price, etc.
F
-
Frederick H. Carr
Contact options for registered users
Vote on answer
- posted
1 year ago
Tue, Nov 29, 2022 7:48 PM
I just got back from dental appointment with the bad news that a cracked tooth will require a root canal. I will send you a copy of the plans, but I don't want to sell the kit, as I still want to build the clock one day. It is packed away in a storage unit, so it might be a day or two before you hear back from me.
C
-
Cole
Contact options for registered users
Vote on answer
- posted
1 year ago
Tue, Nov 29, 2022 9:40 PM
Thank you very much. My address is 96 Coolridge St. Greenville, RI 02828 Please advise any expense you incur. Thanks again. Cole Metz
C
-
Cole
Contact options for registered users
Vote on answer
- posted
1 year ago
Fri, Dec 9, 2022 4:32 PM
HI Rick, just checking in to see if you were able to locate the # 7672 M&S clock plans. You can reach me at colesmetz at yahoo dot com. Thank you.
C
-
Cole Metz
Contact options for registered users
Vote on answer
- posted
1 year ago
Fri, Dec 9, 2022 10:37 PM
HI Fred, just checking in to see if you were able to locate the # 7672 M&S clock plans. (Sorry, I mixed your name with someone else's on an earlier email today.) You can reach me at colesmetz at yahoo dot com. Thank you very much for looking. PS: Hope the root canal went well! (I have a son who is a dentist and can appreciate your situation.)
C
-
Cole
Contact options for registered users
Vote on answer
- posted
1 year ago
Tue, Dec 27, 2022 10:33 PM
Hello Fred, have you had any luck in finding the M&S Vienna Regulator plans? Please advise. Thanks and Happy New Year! Cole Metz
C
-
Cole Metz
Contact options for registered users
Vote on answer
- posted
1 year ago
Mon, Apr 17, 2023 8:01 PM
Dear Mr. Carr, Were you ever able to track down the plans to the Mason & Sullivan clock? If so, please advise and I will pay you for the cost to copy and send them to me.
Thanks!
Cole Metz
96 Coolridge Rd Greenville, RI 02828
S
-
S Nenstiel
Contact options for registered users
Vote on answer
- posted
1 year ago
Sun, Jun 18, 2023 1:23 PM
Hello! My husband purchased (probably in the 1980's) the plans for a long Mason & Sullivan Vienna Regulator clock. I would like to post a picture to understand if we all are talking about the same clock--I have no plan number--but cannot figure out how to post a picture. It is a long simple design. The plans themselves are very simple--not extremely detailed--and there doesn't seem to be any info included on how to mount the works. While my husband decided to build this clock after M & S closed, he was able to source the clock works from someone in England. In the meantime he cut wood and let the project sit due to life. He is now deceased and I am having the clock built to honor his memory. However, I do not have hardware for this clock, nor do I have a clock works number to give to my woodworker so he knows how to set the supports for the clock works. Is anyone able to help me get the information I need (find a place to purchase the necessary hardware; get info on how to set the clock works support) as well as show me a picture of the clock being discussed?
I would be more than happy to share the plans that I have (when I get them back from the my woodworker) for your help. Thank you! S.
G
-
grassoj@ulano.com
Contact options for registered users
Vote on answer
- posted
11 months ago
Tue, Jun 27, 2023 2:32 PM
I would be interested in purchasing the Vienna regulator clock plans from you. You can contact me via e-mail at the following address: snipped-for-privacy@ulano.com I look forward to hearing from you soon. Regards,
Joe
G
-
Gee
Contact options for registered users
Vote on answer
- posted
11 months ago
Wed, Jun 28, 2023 11:10 PM
Hi Cole, Apologies for not getting back to you. If you have not found a copy of the plans yet, I'll go to Staples to see if they can make a copy of them. I would still like to keep my copy in hopes of making one myself one day.
